| Os motores de busca de Datasheet de Componentes eletrônicos |
|
PIC18F8723E/PTSQTP Folha de dados(PDF) 40 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F8723E/PTSQTP Folha de dados(HTML) 40 Page - Microchip Technology |
|
40 / 60 page ![]() PIC18F8723 FAMILY DS39894A-page 38 Preliminary © 2007 Microchip Technology Inc. 2.8 Use of the ECCP2 Trigger An A/D conversion can be started by the Special Event Trigger of the ECCP2 module. This requires that the CCP2M3:CCP2M0 bits (CCP2CON<3:0>) be programmed as ‘1011’ and that the A/D module is enabled (ADON bit is set). When the trigger occurs, the GO/DONE bit will be set, starting the A/D acquisition and conversion, and the Timer1 (or Timer3) counter will be reset to zero. Timer1 (or Timer3) is reset to automat- ically repeat the A/D acquisition period with minimal software overhead (moving ADRESH:ADRESL to the desired location). The appropriate analog input chan- nel must be selected and the minimum acquisition period is either timed by the user, or an appropriate TACQ time selected before the Special Event Trigger sets the GO/DONE bit (starts a conversion). If the A/D module is not enabled (ADON is cleared), the Special Event Trigger will be ignored by the A/D module but will still reset the Timer1 (or Timer3) counter. TABLE 2-2: REGISTERS ASSOCIATED WITH A/D OPERATION Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset Values INTCON GIE/GIEH PEIE/GIEL TMR0IE INT0IE RBIE TMR0IF INT0IF RBIF (3) PIR1 PSPIF ADIF RC1IF TX1IF SSP1IF CCP1IF TMR2IF TMR1IF (3) PIE1 PSPIE ADIE RC1IE TX1IE SSP1IE CCP1IE TMR2IE TMR1IE (3) IPR1 PSPIP ADIP RC1IP TX1IP SSP1IP CCP1IP TMR2IP TMR1IP (3) PIR2 OSCFIF CMIF — EEIF BCL1IF HLVDIF TMR3IF CCP2IF (3) PIE2 OSCFIE CMIE — EEIE BCL1IE HLVDIE TMR3IE CCP2IE (3) IPR2 OSCFIP CMIP — EEIP BCL1IP HLVDIP TMR3IP CCP2IP (3) ADRESH A/D Result Register High Byte (3) ADRESL A/D Result Register Low Byte (3) ADCON0 — — CHS3 CHS2 CHS1 CHS0 GO/DONE ADON (3) ADCON1 — — VCFG1 VCFG0 PCFG3 PCFG2 PCFG1 PCFG0 (3) ADCON2 ADFM — ACQT2 ACQT1 ACQT0 ADCS2 ADCS1 ADCS0 (3) TRISA TRISA7(1) TRISA6(1) TRISA5 TRISA4 TRISA3 TRISA2 TRISA1 TRISA0 (3) TRISF TRISF7 TRISF6 TRISF5 TRISF4 TRISF3 TRISF2 TRISF1 TRISF0 (3) TRISH(2) TRISH7 TRISH6 TRISH5 TRISH4 TRISH3 TRISH2 TRISH1 TRISH0 (3) Legend: — = unimplemented, read as ‘0’. Shaded cells are not used for A/D conversion. Note 1: PORTA<7:6> and their direction bits are individually configured as port pins based on various primary oscillator modes. When disabled, these bits read as ‘0’. 2: These registers are not implemented on PIC18F6628/6723 devices. 3: For these Reset values, see the “PIC18F8722 Family Data Sheet” (DS39646). |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |