| Os motores de busca de Datasheet de Componentes eletrônicos |
|
PIC18F8723E/PTSQTP Folha de dados(PDF) 36 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F8723E/PTSQTP Folha de dados(HTML) 36 Page - Microchip Technology |
|
36 / 60 page ![]() PIC18F8723 FAMILY DS39894A-page 34 Preliminary © 2007 Microchip Technology Inc. 2.1 A/D Acquisition Requirements For the A/D Converter to meet its specified accuracy, the charge holding capacitor (CHOLD) must be allowed to fully charge to the input channel voltage level. The analog input model is shown in Figure 2-3. The source impedance (RS) and the internal sampling switch (RSS) impedance directly affect the time required to charge the capacitor, CHOLD. The sampling switch (RSS) impedance varies over the device voltage (VDD). The source impedance affects the offset voltage at the ana- log input (due to pin leakage current). The maximum recommended impedance for analog sources is 2.5 k Ω. After the analog input channel is selected (changed), the channel must be sampled for at least the minimum acquisition time before starting a conversion. To calculate the minimum acquisition time, Equation 2-1 may be used. This equation assumes that 1/2 LSb error is used (4096 steps for the 12-bit A/D). The 1/2 LSb error is the maximum error allowed for the A/D to meet its specified resolution. Example 2-3 shows the calculation of the minimum required acquisition time, TACQ. This calculation is based on the following application system assumptions: CHOLD = 25 pF Rs = 2.5 k Ω Conversion Error ≤ 1/2 LSb VDD =3V → Rss = 4 kΩ Temperature = 85 °C (system max.) EQUATION 2-1: ACQUISITION TIME EQUATION 2-2: A/D MINIMUM CHARGING TIME EQUATION 2-3: CALCULATING THE MINIMUM REQUIRED ACQUISITION TIME Note: When the conversion is started, the holding capacitor is disconnected from the input pin. TACQ = Amplifier Settling Time + Holding Capacitor Charging Time + Temperature Coefficient =TAMP + TC + TCOFF VHOLD = (VREF – (VREF/4096)) • (1 – e(-TC/CHOLD(RIC + RSS + RS))) or TC = – (CHOLD)(RIC + RSS + RS) ln(1/4096) TACQ =TAMP + TC + TCOFF TAMP =0.2 µs TCOFF = (Temp – 25 °C)(0.02 µs/°C) (85 °C – 25°C)(0.02 µs/°C) 1.2 µs Temperature coefficient is only required for temperatures > 25 °C. Below 25°C, TCOFF = 0 µs. TC = -(CHOLD)(RIC + RSS + RS) ln(1/4096) µs -(25 pF) (1 k Ω + 4 kΩ + 2.5 kΩ) ln(0.0002441) µs 1.56 µs TACQ = 0.2 µs + 1.56 μs + 1.2 µs 2.96 µs |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |