Rev. 00

Rev. 00

December 2007

December 2007

www.ZLED.com

www.ZLED.com

서식번호 : SSC-QP-7-07-24 (Rev.00)

<080226> Rev. 0.2

3) Static Electricity

• Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist

band or an anti-electrostatic glove be used when handling the LEDs.

• All devices, equipment and machinery must be properly grounded.

It is recommended precautions be taken against surge voltage to the equipment that mounts

the LEDs.

4) Heat Generation

• Thermal is one of the important parameter to design the end product. Please consider the heat

generation of the LEDs.

• The operating current should be decided after considering the ambient maximum temperature

of LEDs.

5) Others

• The color of the LEDs is changed a little by an operating current and thermal.

• Anti radioactive ray design is not considered for the products listed here in.

• Gallium arsenide is used in some of the products listed in this publication. These products

are dangerous if they are burned or smashed in the process of disposal. It is also dangerous

to drink the liquid or inhale the gas generated by such products when chemically disposed.

• This device should not be used in any type of fluid such as water, oil, organic solvent and etc.

When washing is required, IPA(Isopropyl Alcohol) should be used.

• When the LEDs are illuminating, operating current should be decided after considering the

junction temperature.

Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5

• The appearance and specifications of the product may be modified for improvement without

notice.

SEOUL SEMICONDUCTOR CO., LTD.

148-29, Kasan-Dong, Keumchun-Gu, Seoul, Korea

TEL : +82-2-3281-6269

FAX :+82-2-857-5430

www.seoulsemicon.com

www.zled.com