PSD913F2 datasheet(49/91 Pages) STMICROELECTRONICS

49 / 91 page

PSD9XX Family

PSD935G2

Control

Direction

Defined In

Mode

PSDsoft

Setting

Declare

1 = output,

MCU I/O

pins only

(Note 1)

0 = input

Declare pins

PLD I/O

and logic or chip

select equations

Data Port

Selected for

(Port F)

MCU with

non-mux bus

Address Out

Declare

(Port E, F, G)

pins only

Address In

Declare pins

(Port A,B,C,D,F)

JTAG ISP

Declare pins

only

Table 17. Port Operating Mode Settings

*NA = Not Applicable

NOTE: 1. Control Register setting is not applicable to Ports A, B and C.

9.4.2.1 MCU I/O Mode

In the MCU I/O Mode, the microcontroller uses the PSD935G2 ports to expand its own

I/O ports. By setting up the CSIOP space, the ports on the PSD935G2 are mapped into the

microcontroller address space. The addresses of the ports are listed in Table 6.

A port pin can be put into MCU I/O mode by writing a ‘0’ to the corresponding bit in the

Control Register (Port E, F and G). The MCU I/O direction may be changed by writing

to the corresponding bit in the Direction Register. See the subsection on the Direction

content of the Data Out Register drives the pin. When configured as an input, the

microcontroller can read the port input through the Data In buffer. See Figure 20.

Ports A, B and C do not have Control Registers, and are in MCU I/O mode by default.

They can be used for PLD I/O if they are specified in PSDsoft.

9.4.2.2 PLD I/O Mode

The PLD I/O Mode uses a port as an input to the CPLD’s Input Micro

⇔Cells, and/or

as an output from the GPLD. The corresponding bit in the Direction Register must not be

set to ‘1’ if the pin is defined as a PLD input pin in PSDsoft. The PLD I/O Mode is specified

in PSDsoft by declaring the port pins, and then specifying an equation in PSDsoft.

The

PSD935G2

Functional

Blocks

(cont.)

PSD913F2 Folha de dados(PDF) 49 Page - STMicroelectronics

PSD913F2 Folha de dados(HTML) 49 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91

Folha de dados Download

Ligação URL