HD404618TF datasheet(29/91 Pages) RENESAS

Nome de Peças	HD404618TF

Descrição Electrónicos	4-Bit Single-Chip Microcomputer

PDF	91 Pages

Scroll/Zoom	100%

Fabricante Electrônico	RENESAS [Renesas Technology Corp]

Página de início	http://www.renesas.com

Logo

29 / 91 page

HD404618 Series

Active Mode: The MCU operates according to the clock generated by the system oscillators OSC

1 and

OSC

Standby Mode: The MCU enters standby mode when the SBY instruction is executed from active mode.

In this mode, the oscillators, interrupts, timer/counters, and serial interface continue to operate, but all

instruction execution-related clocks stop. The stopping of these clocks stops the CPU, retaining all RAM

and register contents and maintaining the current I/O pin status.

Standby mode is terminated by a RESET input or an interrupt request. If it is terminated by RESET input,

the MCU is reset as well. After an interrupt request, the MCU enters active mode and resumes, executing

the next instruction after the SBY instruction. If the interrupt enable flag is 1, that interrupt is then

processed; if it is 0, the interrupt request is left pending and normal instruction execution continues. A

flowchart of operation in standby mode is shown in figure 11.

HD404618TF Folha de dados(PDF) 29 Page - Renesas Technology Corp