11

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHECKING THE RESPIRATOR BEFORE USE

Before using the respirator, check the following items:

1. Verify the air filter is undamaged and securely connected to the blower assembly

2. Be sure the breathing tube is undamaged and properly connected to the blower

assembly and hood.

3. Verify the battery is fully charged and securely connected.

4. Test the air flow as above.

5. Turn on the blower and check for audible, visual and vibratory airflow alarms.

6. Inspect the face seal and replace if damaged.

PUTTING ON THE RESPIRATOR

Place blower assembly against lower back

with breathing tube extending upwards.

Fasten belt around waist and adjust so as

to make a comfortable fit.