4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Connect the three core mains cable to a suitable industrial supply isolator, or

heavy duty plug meeting the requirements of BS EN 60309. This charger must

be connected to a supply having a rated capacity of greater than 16 Amps.

A normal 13 Amp (BS1363) plug must NOT be used.

NOTE: The maximum input current for this unit is 47 amps.

WARNING: THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are coloured in accordance with

the following code:

GREEN AND YELLOW

-

EARTH (E)

BLUE

-

NEUTRAL (N)

BROWN

-

LIVE (L)

As the colours of the flexible cord of this appliance may not correspond with

the coloured markings identifying terminals, proceed as follows:

• Connect GREEN AND YELLOW coloured cord to terminal marked letter

“E” or Earth Symbol

or coloured Green and Yellow.

• Connect BROWN cord to terminal marked letter ‘L’ or coloured Red.

• Connect BLUE cord to terminal marked letter “N’ or coloured Black.

WARNING: READ THE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY.

WARNING: A 13 AMP (BS1363) PLUG IS NOT SUITABLE.

WARNING: THIS APPLIANCE MUST BE EARTHED.