3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY INSTRUCTIONS

• Spillages of abrasive material, which may be slippery, must be

cleaned up immediately to avoid injury.

• Replace or repair damaged parts- Use recommended parts only.

Non-authorised parts may be dangerous and will invalidate the

warranty.

• Remove loose clothing. Remove ties, watches, rings, other loose

jewellery and contain long hair.

• Always keep the blast nozzle directed at the workpiece.

• Keep all other persons away from the working area. Contact with a

high pressure blast or inhaling the dust generated is dangerous.

• DO NOT operate the blaster if any parts are missing or damaged as

this may cause failure and/or personal injury.

NOTE: This manual is only for the soda blasting conversion kit, for full safety,

assembly and operating instructions please refer to the manual for the

Clarke CPSB100 or CPSB200.

WARNING: TURN OFF OR DISCONNECT FROM AIR SUPPLY BEFORE

SERVICING OR PERFORMING ANY MAINTENANCE AND WHEN UNIT IS

NOT IN USE. FAILURE TO COMPLY WITH THIS INSTRUCTION MAY DAMAGE

THE UNIT AND WILL INVALIDATE YOUR WARRANTY

WARNING: WEAR APPROVED EAR, EYE, HAND AND RESPIRATORY

PROTECTION WHEN OPERATING THE BLASTER. A FULL RANGE OF

PERSONAL SAFETY EQUIPMENT IS AVAILABLE FROM YOUR CLARKE

DEALER