19/39

M50FW002

Note: 1. Applies to Top Block Lock Register (T_BLOCK_LK) and Top Block [-1] Lock Register (T_MINUS01_LK) to Top Block [-6] Lock Reg-

ister (T_MINUS06_LK).

Note: 1. Applies to the General Purpose Input Register (FGPI_REG).

Bit

Bit Name

Value

Function

7-3

Reserved

2

Read-Lock

‘1’

Bus Read operations in this Block always return 00h.

‘0’

Bus read operations in this Block return the Memory Array contents. (Default

value).

1

Lock-Down

‘1’

Changes to the Read-Lock bit and the Write-Lock bit cannot be performed. Once a

‘1’ is written to the Lock-Down bit it cannot be cleared to ‘0’; the bit is always reset

to ‘0’ following a Reset (using RP or INIT) or after power-up.

‘0’

Read-Lock and Write-Lock can be changed by writing new values to them. (Default

value).

0

Write-Lock

‘1’

Program and Erase operations in this Block will set an error in the Status Register.

The memory contents will not be changed. (Default value).

‘0’

Program and Erase operations in this Block are executed and will modify the Block

contents.

Bit

Bit Name

Value

Function

7-5

Reserved

4

FGPI4

‘1’

‘0’

3

FGPI3

‘1’

‘0’

2

FGPI2

‘1’

‘0’

1

FGPI1

‘1’

‘0’

0

FGPI0

‘1’

‘0’