CY8CKIT-059 datasheet(24/140 Pages) INFINEON

24 / 140 page

Document Number: 001-84932 Rev. *N

Page 23 of 139

PSoC® 5LP: CY8C58LP Family

Datasheet

6. System Integration

6.1 Clocking System

The clocking system generates, divides, and distributes clocks

throughout the PSoC system. For the majority of systems, no

external crystal is required. The IMO and PLL together can

generate up to a 80 MHz clock, accurate to ±1% over voltage and

temperature. Additional internal and external clock sources allow

each design to optimize accuracy, power, and cost. All of the

system clock sources can be used to generate other clock

frequencies in the 16-bit clock dividers and UDBs for anything

you want, for example a UART baud rate generator.

Clock generation and distribution is automatically configured

through the PSoC Creator IDE graphical interface. This is based

on the complete system’s requirements. It greatly speeds the

design process. PSoC Creator allows designers to build clocking

systems with minimal input. The designer can specify desired

clock frequencies and accuracies, and the software locates or

builds a clock that meets the required specifications. This is

possible because of the programmability inherent in PSoC.

Key features of the clocking system include:



Seven general purpose clock sources



3- to 74-MHz IMO, ±1% at 3 MHz



4- to 25-MHz external crystal oscillator (MHzECO)



Clock doubler provides a doubled clock frequency output for

the USB block, see USB Clock Domain on page 26.



DSI signal from an external I/O pin or other logic



24- to 80-MHz fractional phase-locked loop (PLL) sourced

from IMO, MHzECO, or DSI



1-kHz, 33-kHz, 100-kHz ILO for watchdog timer (WDT) and

Sleep Timer



32.768-kHz external crystal oscillator (ECO) for RTC



IMO has a USB mode that auto-locks to the USB bus clock

requiring no external crystal for USB. (USB equipped parts

only)



Independently sourced clock in all clock dividers



Eight 16-bit clock dividers for the digital system



Four 16-bit clock dividers for the analog system



Dedicated 16-bit divider for the CPU bus and CPU clock



Automatic clock configuration in PSoC Creator

Table 6-1. Oscillator Summary

Source

Fmin

Tolerance at Fmin

Fmax

Tolerance at Fmax

Startup Time

IMO

3 MHz

±1% over voltage and temperature

74 MHz

±7%

13 µs max

MHzECO

4 MHz

Crystal dependent

25 MHz

Crystal dependent

5 ms typ, max is

crystal dependent

DSI

0 MHz

Input dependent

33 MHz

Input dependent

PLL

24 MHz

Input dependent

80 MHz

Input dependent

250 µs max

Doubler

48 MHz

Input dependent

48 MHz

Input dependent

1 µs max

ILO

1 kHz

–50%, +100%

100 kHz

–55%, +100%

15 ms max in lowest

power mode

kHzECO

32 kHz

Crystal dependent

32 kHz

Crystal dependent

500 ms typ, max is

crystal dependent

CY8CKIT-059 Folha de dados(PDF) 24 Page - Infineon Technologies AG

CY8CKIT-059 Folha de dados(HTML) 24 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL