UCD3138128 datasheet(59/84 Pages) TI2

59 / 84 page

UCD3138128, UCD3138A64

www.ti.com

SLUSBZ8B – JUNE 2014 – REVISED FEBRUARY 2017

Product Folder Links: UCD3138128 UCD3138A64

Submit Documentation Feedback

10 Applications and Implementation

10.1 Application Information

The UCD3138x has an extensive set of fully-programmable, high-performance peripherals that make it suitable

for a wide range of power supply applications. In order to make the part easier to use, TI has prepared an

extensive set of materials to demonstrate the features of the device for several key applications. In each case the

following items are available:

1. Full featured EVM hardware that demonstrates classic power supply functionality.

2. An EVM user guide that contains schematics, bill-of-materials, layout guidance and test data showcasing the

performance and features of the device and the hardware.

3. A firmware programmers manual that provides a step-by-step walk through of the code.

Table 3. Application Information

APPLICATION

EVM DESCRIPTION

Phase shifted full

bridge

This EVM demonstrates a PSFB DC-DC power converter with digital control using the UCD3138x device. Control is

implemented by using PCMC with slope compensation. This simplifies the hardware design by eliminating the need

for a series blocking capacitors and providing the inherent input voltage feed-forward that comes from PCMC. The

controller is located on a daughter card and requires firmware in order to operate. This firmware, along with the entire

source code, is made available through TI. A free, custom function GUI is available to help the user experiment with

the different hardware and software enabled features. The EVM accepts a DC input from 350 VDC to 400 VDC, and

outputs a nominal 12 VDC with full load output power of 360 W, or full output current of 30 A.

LLC resonant

converter

This EVM demonstrates an LLC resonant half-bridge DC-DC power converter with digital control using the

UCD3138x device. The controller is located on a daughter card and requires firmware in order to operate. This

firmware, along with the entire source code, is made available through TI. A free, custom function GUI is available to

help the user experiment with the different hardware and software enabled features. The EVM accepts a DC input

from 350 VDC to 400 VDC, and outputs a nominal 12 VDC with full load output power of 340 W, or full output current

of 29 A.

UCD3138128 Folha de dados(PDF) 59 Page - Texas Instruments