UCD3138128 datasheet(4/84 Pages) TI2

4 / 84 page

UCD3138128, UCD3138A64

SLUSBZ8B – JUNE 2014 – REVISED FEBRUARY 2017

www.ti.com

Product Folder Links: UCD3138128 UCD3138A64

Submit Documentation Feedback

(1)

For detailed ordering information please check the Mechanical, Packaging, and Orderable Information section at the end of this

datasheet.

4 Description

The UCD3138 family is a digital power supply controller from Texas Instruments offering superior levels of

integration and performance in a single chip solution. The UCD3138x, in comparison to Texas Instruments

UCD3138x digital power controller offers 64 kB of program Flash memory in UCD3138A64 (128 KB in

UCD3138128) and additional options for communication such as SPI and a second I2C port. The availability of

program Flash memory in multiple 32 kB banks enables designers to implement dual images of firmware (e.g.

one main image + one back-up image) in the device and provides the option to execute from either of the banks

using appropriate algorithms. It also creates the unique opportunity for the processor to load a new program and

subsequently execute that program without interrupting power delivery. This feature allows the end user to add

new features to the power supply in the field while eliminating any down-time required to load the new program.

The flexible nature of the UCD3138 family makes it suitable for a wide variety of power conversion applications.

In addition, multiple peripherals inside the device have been specifically optimized to enhance the performance

of AC/DC and isolated DC/DC applications and reduce the solution component count in the IT and network

infrastructure space. The UCD3138 family is a fully programmable solution offering customers complete control

of their application, along with ample ability to differentiate their solution. At the same time, TI is committed to

simplifying our customer’s development effort through offering best in class development tools, including

application firmware, Code Composer StudioTM software development environment, and TI’s Fusion Power

Development GUI which enables customers to configure and monitor key system parameters.

At the core of the controller are the Digital Power Peripherals (DPP). Each DPP implements a high speed digital

control loop consisting of a dedicated Error Analog to Digital Converter (EADC), a PID based 2 pole - 2 zero

digital compensator and DPWM outputs with 250ps pulse width resolution. The device also contains a 12-bit, 267

ksps general purpose ADC with up to 15 channels, timers, interrupt control, PMBus, I2C, SPI and UART

communications ports. The device is based on a 32-bit ARM7TDMI-S RISC microcontroller that performs real-

time monitoring, configures peripherals and manages communications. The ARM microcontroller executes its

program out of programmable flash memory as well as on chip RAM and ROM.

In addition to the DPP, specific power management peripherals have been added to enable high efficiency

across the entire operating range, high integration for increased power density, reliability, and lowest overall

system cost and high flexibility with support for the widest number of control schemes and topologies. Such

peripherals include: light load burst mode, synchronous rectification, LLC and phase shifted full bridge mode

switching, input voltage feed forward, copper trace current sense, ideal diode emulation, constant current

constant power control, synchronous rectification soft on and off, peak current mode control, flux balancing,

secondary side input voltage sensing, high resolution current sharing, hardware configurable soft start with pre

bias, as well as several other features. Topology support has been optimized for voltage mode and peak current

mode controlled phase shifted full bridge, single and dual phase PFC, bridgeless PFC, hard switched full bridge

and half bridge, active clamp forward converter, two switch forward converter and LLC half bridge and full bridge.

Device Information(1)

PART NUMBER

PACKAGE

BODY SIZE (NOM)

UCD3138128

TQFP (80)

12.00 mm × 12.00 mm

UCD3138A64

UCD3138128 Folha de dados(PDF) 4 Page - Texas Instruments

UCD3138128 Folha de dados(HTML) 4 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

Folha de dados Download

Ligação URL