TMP112BIDRLR datasheet(29/41 Pages) TI1

Nome de Peças	TMP112BIDRLR

Descrição Electrónicos	TMP112x High-Accuracy, Low-Power, Digital Temperature Sensors With SMBus and Two-Wire Serial Interface in SOT563 and X2SON Packages

PDF	41 Pages

Scroll/Zoom	100%

Fabricante Electrônico	TI1 [Texas Instruments]

Página de início	http://www.ti.com

Logo

29 / 41 page

Time (s)

-1

10 11 12

100

110

DRL package

DPW package

Figure 8-4. Temperature Step Response

8.2.4 Power Supply Recommendations

The TMP112 family operates with power supply in the range of 1.4 to 3.6 V. The device is optimized for operation

at 3.3-V supply but can measure temperature accurately in the full supply range.

A power-supply bypass capacitor is required for proper operation. Place this capacitor as close as possible to

the supply and ground pins of the device. A typical value for this supply bypass capacitor is 0.01μF. Applications

with noisy or high-impedance power supplies can require additional decoupling capacitors to reject power-supply

noise.

8.3 Layout

8.3.1 Layout Guidelines

Place the power-supply bypass capacitor as close as possible to the supply and ground pins. The recommended

value of this bypass capacitor is 0.01μF. Additional decoupling capacitance can be added to compensate

for noisy or high-impedance power supplies. Pull up the open-drain output pins (SDA, SCL) through 5kΩ

pullup resistors. However, using a minimal SDA and ALERT pins pull-up current is recommended to prevent

self-heating and temperature accuracy reduction.

www.ti.com

TMP112, TMP112D

SBOS473L – MARCH 2009 – REVISED JULY 2024

Submit Document Feedback

Product Folder Links: TMP112 TMP112D

TMP112BIDRLR Folha de dados(PDF) 29 Page - Texas Instruments