IA188EM-PQF100I-R datasheet(28/133 Pages) INNOVASIC

28 / 133 page

IA186EM/IA188EM

Data Sheet

8/16-BIT Microcontrollers

As of Production Version -03

3. When used as a PIO pin, it is an input with an available pull-up option.

4. When used as a PIO pin, it is an input with an available pull-down option.

The value of the PDATA registers is undefined at reset.

PDATA 0

5 4 3

PDATA (15 – 0)

PDATA 1

5 4 3

PDATA (31 – 16)

PDATA [15:0] (bits 15-0) – PIO Data 0 Bits. This register contains the values of the bits that are

either driven on or received from the corresponding PIO pins, depending on its configuration each pin

as either an output or an input. The values of these bits correspond to those in the PIO direction

registers and PIO Mode registers.

PDATA [31:16] (bits 15-0) – PIO Data 1 Bits. This register contains the values of the bits that are

either driven on, or received from, the corresponding PIO pins depending on its configuration each pin

as either an output or an input. The values of these bits correspond to those in the PIO direction

registers and PIO Mode registers

The PIO pins can be operated as open-drain outputs by:

1. Maintaining the data constant in the appropriate bit of the PIO data register.

2. Writing the value of the data bit into the respective bit position of the PIO Direction register, so that

the output is either 0 or disabled depending on the value of the data bit.

PDIR1 (078h) - PIO DIRection Registers.

PDIR0 (072h)

Each PIO pin is configured as an input or an output by the corresponding bit in the PIO direction register.

PIO Mode and PIO Direction Settings

PIO Mode

PIO Direction

Pin function

Normal operation

PIO input with pullup/pulldown

PIO output

PIO input without pullup/pulldown

3737 Princeton NE, Ste 130 • Albuquerque, NM 87107 • Tel 505.883.5263 • Fax 505.883.5477 • www.Innovasic.com

IA188EM-PQF100I-R Folha de dados(PDF) 28 Page - InnovASIC, Inc