AS7343 datasheet(33/58 Pages) OSRAM

33 / 58 page

Document Feedback

AS7343

Datasheet

• PUBLIC

DS001046

• v6-00 • 2023-Jun-07

│ 32

Addr: 0x65

CFG10

Bit

Bit Name

Default

Access

Bit Description

2:0

FD_PERS

Flicker Detect Persistence.

Sets the number of consecutive flicker detect results

that must be different before the flicker detect status

will be changed. Flicker detection interrupts on SINT

are affected by this setting. Flicker detect

persistence is equal to

2(��_��−1)

Setting “0” equals to every time.

AZ_CONFIG Register (Address 0xDE)

The following register configures how often the spectral engine offsets are reset (auto zero) to

compensate for changes of the device temperature. The typical time auto zero needs to be completed

is 15 ms.

Figure 33:

AZ_CONFIG Register

Addr: 0xDE

AZ_CONFIG

Bit

Bit Name

Default

Access

Bit Description

7:0

AZ_NTH_ITERATION

255

AUTOZERO FREQUENCY.

Sets the frequency at which the device performs auto

zero of the spectral engines.

Note: If FD

EN = “1” auto zero is also done for ADC 5.

The flicker detection measurement will be interrupted

and restarted in this case.

VALUE

AUTOZERO FREQUENCY

Never (not recommended)

Every integration cycle

Every 2 cycles

…

Every “AZ_NTH_ITERATION” cycle

254

Every 254 cycles

255

Only before first measurement cycle

AS7343 Folha de dados(PDF) 33 Page - OSRAM GmbH

AS7343 Folha de dados(HTML) 33 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Folha de dados Download

Ligação URL