 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
L9396 Folha de dados(PDF) 24 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L9396 Folha de dados(HTML) 24 Page - STMicroelectronics |
|
|
24 / 109 page  Power supply L9396 24/109 DS12539 Rev 6 A second undervoltage threshold is present (VCPLOW2) with a higher value. It can be used together with PDG turn-on threshold voltage to detect that low charge pump voltage is responsible for low PDG ON voltage. 3.6 VPREREG buck regulator The integrated buck regulator provides a reduced voltage supply to the remaining regulators and to the WSS / tracking interface. Its default output level 6.5 V can be further increased to 7.2 V via register of BUCK VOLTAGE SELECTION in SPI. This regulator is protected against short circuits and over temperature with dedicated thermal sensor, and an over/under voltage monitor is implemented. VPREREG itself is not shut down in case of over/under voltage at its output. VPREREG itself is not shut down in case of overcurrent, only in case of over temperature the regulator is switched off. This regulator is not protected against diode loss and the IC may be irreparably damaged due to diode loss. Under voltage of VPREREG (VPREREG_UV) leads to shutdown of VCC, VCC5 and VCORE regulators. Table 9. Charge pump electrical characteristics Symbol Parameter Conditions Min Typ Max Unit VCP_5V6 Charge pump output voltage VBST > 5.6 V Iload_ext = 8 mA VBST+7.0 - VBST+11 V VCP_8V Charge pump output voltage VBST >8V Iload_ext=10mA VBST+8.9 - VBST+11 V VCP_8V55 Charge pump output voltage VBST >8.55V Iload_ext=1mA VBST+9.1 - VBST+11 V ICP_5V6 Charge pump output current VBST>5.6V - - 8 mA ICP_8V Charge pump output current VBST>8V - - 10 mA fCP Charge pump frequency -- fOSCINT/34(0.470) - MHz VCPLOW Charge pump low voltage threshold - VBST+5.6 VBST+6 VBST+6.8 V VCPLOW2 Charge pump second low voltage threshold - VBST+7.85 VBST+8.35 VBST+8.85 V tfCP Low voltage filter time -- 10 - µs CTANK Output capacitor Design Info - 220 - nF CCP1, CCP2 Switching capacitor Design Info - 68 - nF TJSDCP Thermal Shutdown - 175 - 200 °C THYS_TSDCP Thermal Shutdown hysteresis -5 - 15 °C |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
