8 Application and Implementation

Note

Information in the following applications sections is not part of the TI component specification,

and TI does not warrant its accuracy or completeness. TI’s customers are responsible for

determining suitability of components for their purposes, as well as validating and testing their design

implementation to confirm system functionality.

8.1 Application Information

The DLPR410 device configuration PROM ships pre-programmed with configuration code for the DLPC410ZYR

controller. Upon power-up, the DLPC410ZYR controller and the DLPR410 device connect to enable

configuration information to be sent from the DLPR410 device to the DLPC410ZYR controller, such that the

DLPC410ZYR controller can configure itself for proper operation within the application. Without the DLPR410

device properly connected to the DLPC410ZYR controller in the application system, the DLPC410ZYR controller

does not boot and the system remains inoperable.

8.2 Typical Application

A typical embedded system application using the DLPR410 device to program the DLPC410 controller (to drive

one of 5 different DMDs) is shown in Figure 8-1. For complete details of this typical application refer to the

DLPC410 controller data sheet listed in Table 11-2.

DLPC410ZYR

SCP Bus

LVDS Data Bus(C,D)

Power Management

OSC

DLPA200 Control

DLPR410

JTAG

DLPC410 Info Signals

Control Signals

Row, Block Signals

LVDS Data Bus

LEDs / LASERs /

Lamp

PWMs/Triggers

LED/LASER/Lamp Driver

DLPA200

MBRST

Op cal Sensor

Op cal Power Sense

LVDS Data Bus(A,B)

DLPA200 Control

DLPA200

MBRST

D0

Clk

DONE

OE

TI Components

DMDs

DLP650LNIR

DLP7000

DLP7000UV

DLP9500

DLP9500UV

Figure 8-1. DLPR410 and DLPC410ZYR with DMD Example Block Diagram

8.2.1 Design Requirements

The DLPR410 is part of a multi-chipset solution, and it is required to be coupled with the DLPC410ZYR

controller for reliable operation of the DLP650LNIRFYL, DLP7000FLP, DLP7000UVFLP, DLP9500FLN and,

DLP9500UVFLN DMDs. DMDs. For more information, refer to the DLPC410ZYR datasheet listed in Section

11.2.1.

www.ti.com

DLPR410

DLPS027G – AUGUST 2012 – REVISED AUGUST 2021

Copyright © 2021 Texas Instruments Incorporated

Submit Document Feedback

11

Product Folder Links: DLPR410