DRV8210P 11-V H-Bridge Motor Driver with PWM Interface and Low-Power Sleep

Mode

1 Features

• N-channel H-bridge motor driver

– MOSFET on-resistance: HS + LS 1.05 Ω

– Drives one bidirectional brushed DC motor

– One single- or dual-coil latching relay

• 1.65-V to 11-V operating supply voltage range

• High output current capability: 1.76-A peak

• Standard PWM Interface (IN1/IN2)

• Supports 1.8-V, 3.3-V, and 5-V logic inputs

• Ultra low-power sleep mode

– Pin-to-pin with DRV8837 & DRV8837C

• Protection features

– Undervoltage lockout (UVLO)

– Overcurrent protection (OCP)

– Thermal shutdown (TSD)

• Family of devices. See Section 5 for details.

– DRV8210: Autosleep and multiple interfaces

– DRV8210P: Sleep pin and PWM interface

2 Applications

• Brushed DC motor, solenoid, & relay driving

• Water, gas, & electricity meters

• IP network camera IR cut filter

• Video doorbell

• Machine vision camera

• Electronic smart lock

• Electronic and robotic toys

• Blood pressure monitors

• Infusion pumps

• Electric toothbrush

• Beauty & grooming

3 Description

The DRV8210P is an integrated motor driver with four

N-channel power FETs, charge pump regulator, and

protection

circuitry.

The

tripler

charge

pump

architecture allows the device to operate down to 1.65

V to accommodate 1.8-V supply rails and low-battery

conditions. The charge pump integrates all capacitors

to reduce the overall solution size of the motor driver

on a PCB and allows for 100% duty cycle operation.

The DRV8210P supports an industry standard PWM

(IN1/IN2) control interface. The nSLEEP pin controls a

low-power sleep mode which achieves ultra-low

quiescent current draw by disabling the internal

circuitry.

The device can supply up to 1.76-A peak output

current. It operates on a motor power supply voltage

from 0 to 11 V, and a logic power supply voltage of

1.65 V to 5.5 V.

The driver offers robust internal protection features

include supply undervoltage lockout (UVLO), output

overcurrent (OCP), and device overtemperature

(TSD).

The DRV8210P is part of a family of devices which

voltage options to support various loads and supply

rails with minimal design changes. See Section 5 for

information on the devices in this family. View our full

portfolio of brushed motor drivers on ti.com.

Table 3-1. Device Information

PART NUMBER (1)

PACKAGE

BODY SIZE (NOM)

DRV8210PDSG

WSON (8)

2.00 mm × 2.00 mm

(1)

For all available packages, see the orderable addendum at

the end of the data sheet.

DRV821xP

H-Bridge

Motor Driver

0 to 11 V

VM

Control Inputs

nSLEEP

Protection

1.65 to 5.5 V

VCC

Simplified Schematic

www.ti.com

DRV8210P

SLVSFG4 – DECEMBER 2020

Copyright © 2020 Texas Instruments Incorporated

Submit Document Feedback

1

Product Folder Links: DRV8210P

DRV8210P

SLVSFG4 – DECEMBER 2020

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.