JS28F256P30T85 datasheet(57/102 Pages) INTEL

57 / 102 page

1-Gbit P30 Family

Datasheet

Intel StrataFlash® Embedded Memory (P30)

April 2005

Order Number: 306666, Revision: 001

10.3.3

WAIT Polarity

The WAIT Polarity bit (WP), RCR[10] determines the asserted level (VOH or VOL) of WAIT.

When WP is set, WAIT is asserted high (default). When WP is cleared, WAIT is asserted low.

WAIT changes state on valid clock edges during active bus cycles (CE# asserted, OE# asserted,

RST# deasserted).

10.3.3.1

WAIT Signal Function

The WAIT signal indicates data valid when the device is operating in synchronous mode

(RCR[15]=0). The WAIT signal is only “deasserted” when data is valid on the bus.

When the device is operating in synchronous non-array read mode, such as read status, read ID, or

read query. The WAIT signal is also “deasserted” when data is valid on the bus.

WAIT behavior during synchronous non-array reads at the end of word line works correctly only

on the first data access.

When the device is operating in asynchronous page mode, asynchronous single word read mode,

and all write operations, WAIT is set to a deasserted state as determined by RCR[10]. See Figure

17, “Asynchronous Single-Word Read (ADV# Latch)” on page 38, and Figure 18, “Asynchronous

Page-Mode Read Timing” on page 39.

Figure 29.

Example Latency Count Setting using Code 3

CLK

CE#

ADV#

A[MAX:0]

D[15:0]

Data

Code 3

Address

Data

R103

High-Z

JS28F256P30T85 Folha de dados(PDF) 57 Page - Intel Corporation