KCU105 datasheet(4/40 Pages) TI

4 / 40 page

Required Software

www.ti.com

SLAU711 – March 2017

Submit Documentation Feedback

HSDC Pro With Xilinx® KCU105

Required Software

4.1

HSDC Pro GUI

Download the latest version of the HSDC Pro GUI (slwc107x.zip) to a local directory on a host PC. This

can be found on the TI website by entering “HIGH SPEED DATA CONVERTER PRO GUI INSTALLER” in

the search parameter window at www.ti.com.

Unzipping the software package generates a folder called High Speed Data Converter Pro - Installer

vx.xx.exe, where x.xx is the version number. Run this program to start the installation.

Follow the on-screen instructions during installation.

NOTE:

If an older version of the GUI has already been installed, make sure to uninstall it before

loading a newer version.

Click on the Install button. A new window opens. Click the Next button.

Accept the License Agreement. Click on Next to start the installation. After the installer has finished, click

on Next one last time.

The installation is now complete. The GUI executable and associated files will reside in the following

directory.

C:\Program Files (x86)\Texas Instruments\High Speed Data Converter Pro

When new TI high speed data converter EVMs or JESD204B interface modes become available that are

not currently supported by the latest release of HSDC Pro GUI, the HSDCProv_xpxx_Patch_setup

executable, available on the TI website under the High Speed Data Converter Pro Software product folder

(http://www.ti.com/tool/dataconverterpro-sw), will allow the user to add these to the GUI device list. After

the patch has been downloaded, follow the on-screen instructions to run the patch. The software displays

the files that will be added. After running the patch, open HSDC Pro and the new parts and modes will

appear in the ADC and DAC device drop-down selection box. The patch is always specific to a core GUI

version and will not work for a GUI version for which the patch was not explicitly created.

4.1.1

Xilinx® Vivado® Design Suite

The Vivado Design Suite by Xilinx, is required in order to load firmware to the FPGA. See the Vivado

Design Suite on Xilinx.com: https://www.xilinx.com/products/design-tools/vivado for more details. The

latest build that supports this integration is Vivado 2016.3.

4.2

Serial Terminal Emulator

A serial terminal emulator is required to establish a serial port connection through the KCU105 dual UART

interface. Any sort of serial terminal software, such as TeraTerm, PuTTY, or Hercules, can be used. For

this user's guide, TeraTerm is used as the main terminal emulator. See the TeraTerm web page for more

details.

KCU105 Folha de dados(PDF) 4 Page - Texas Instruments

KCU105 Folha de dados(HTML) 4 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Folha de dados Download

Ligação URL