WM8591GEDSSLASHRV datasheet(24/50 Pages) WOLFSON

24 / 50 page

WM8591

Product Preview

PP Rev 1.0 May 2005

BIT

LABEL

DEFAULT

DESCRIPTION

R10 (0Ah)

0001010

DAC Interface Control

DACBCP

R11 (0Bh)

0001011

ADC Interface Control

ADCBCP

BCLK Polarity (DSP modes)

0 : normal BCLK polarity

1: inverted BCLK polarity

The WL[1:0] bits are used to control the input word length.

BIT

LABEL

DEFAULT

DESCRIPTION

R10 (0Ah)

0001010

DAC Interface Control

5:4

DACWL

[1:0]

R11 (0Bh)

0001011

ADC Interface Control

5:4

ADCWL

[1:0]

Word Length

00 : 16 bit data

01: 20 bit data

10: 24 bit data

11: 32 bit data

Note: If 32-bit mode is selected in right justified mode, the WM8591 defaults to 24 bits.

In all modes, the data is signed 2’s complement. The digital filters always input 24-bit data. If the

DAC is programmed to receive 16 or 20 bit data, the WM8591 pads the unused LSBs with zeros. If

the DAC is programmed into 32 bit mode, the 8 LSBs are ignored.

Note: In 24 bit I

2S mode, any width of 24 bits or less is supported provided that ADCLRC/DACLRC is

high for a minimum of 24 BCLKs and low for a minimum of 24 BCLKs.

A number of options are available to control how data from the Digital Audio Interface is applied to

the DAC.

MASTER MODES

Control bit ADCMS selects between audio interface Master and Slave Modes for ADC. In ADC

Master mode ADCLRC and ADCBCLK are outputs and are generated by the WM8591. In Slave

mode ADCLRC and ADCBCLK are inputs to WM8591.

BIT

LABEL

DEFAULT

DESCRIPTION

R12 (0Ch)

0001100

Interface Control

ADCMS

Audio Interface Master/Slave Mode

select for ADC:

0 : Slave Mode

1: Master Mode

Control bit DACMS selects between audio interface Master and Slave Modes for the DAC. In DAC

Master mode DACLRC and DACBCLK are outputs and are generated by the WM8591. In Slave

mode DACLRC and DACBCLK are inputs to WM8591.

BIT

LABEL

DEFAULT

DESCRIPTION

R12 (0Ch)

0001100

Interface Control

DACMS

Audio Interface Master/Slave Mode

select for DAC:

0 : Slave Mode

1: Master Mode

MASTER MODE ADCLRC/DACLRC FREQUENCY SELECT

In ADC Master mode the WM8591 generates ADCLRC and ADCBCLK, in DAC master mode the

WM8591 generates DACLRC and DACBCLK. These clocks are derived from the master clock

(ADCMCLK or DACMCLK). The ratios of ADCMCLK to ADCLRC and DACMCLK to DACLRC are

set by ADCRATE and DACRATE respectively.

WM8591GEDS/RV Folha de dados(PDF) 24 Page - Wolfson Microelectronics plc

WM8591GEDS/RV Folha de dados(HTML) 24 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Folha de dados Download

Ligação URL