AT89C5130A-RDTIM datasheet(46/184 Pages) ATMEL

46 / 184 page

AT89C5130A/31A-M

4337C–USB–02/05

Application-

Programming-Interface

Several Application Program Interface (API) calls are available for use by an application

program to permit selective erasing and programming of Flash pages. All calls are made

by functions.

All these APIs are described in detail in the following document on the Atmel web site.

–

Datasheet Bootloader USB AT89C5131.

XROW Bytes

The EXTRA ROW (XROW) includes 128 bytes. Some of these bytes are used for spe-

cific purpose in conjonction with the bootloader.

Table 45. XROW Mapping

Hardware Conditions

It is possible to force the controller to execute the bootloader after a Reset with hard-

ware conditions. Depending on the product type (low pin count or high pin count

package), there are two methods to apply the hardware conditions.

High Pin Count Hardware

Conditions (PLCC52, QFP64)

For high pin count packages, the hardware conditons (EA = 1, PSEN = 0) are sampled

during the RESET rising edge to force the on-chip bootloader execution (See Figure 79

on page 173). In this way the bootloader can be carried out regardless of the user Flash

memory content.

As PSEN is an output port in normal operating mode (running user application or boot-

loader code) after reset, it is recommended to release PSEN after rising edge of reset

signal.

Low Pin Count Hardware

Conditions (QFN32)

Low pin count products do not have PSEN signal, thus for these products, the boot-

loader is always executed after reset thanks to the BLJB bit. The Hardware Condition

are detected at the begining of the bootloader execution from reset.

The default factory Hardware Condition is assigned to port P1.

•

P1 must be equal to FEh

In order to offer the best flexibility, the user can define its own Hardware Condition on

one of the following Ports:

•Port1

•Port3

•

Port4 (only bit0 and bit1)

The Hardware Condition configuration are stored in three bytes called P1_CF, P3_CF,

P4_CF.

Description

Default Value

Address

Copy of the Manufacturer Code

58h

30h

Copy of the Device ID#1: Family code

D7h

31h

Copy of the Device ID#2: Memories size and type

BBh

60h

Copy of the Device ID#3: Name and Revision

FFh

61h

AT89C5130A-RDTIM Folha de dados(PDF) 46 Page - ATMEL Corporation

AT89C5130A-RDTIM Folha de dados(HTML) 46 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL