AT89C5130A-RDTIM datasheet(45/184 Pages) ATMEL

Nome de Peças	AT89C5130A-RDTIM

Descrição Electrónicos	8-bit Flash Microcontroller with Full Speed USB Device

PDF	184 Pages

Scroll/Zoom	100%

Fabricante Electrônico	ATMEL [ATMEL Corporation]

Página de início	http://www.atmel.com

Logo

45 / 184 page

AT89C5130A/31A-M

4337C–USB–02/05

Boot Process

Software Boot Process

Example

Many algorithms can be used for the software boot process. Below are descriptions of

the different flags and Bytes.

Boot Loader Jump bit (BLJB):

- This bit indicates if on RESET the user wants to jump to this application at address

@0000h on FM0 or execute the boot loader at address @F400h on FM1.

- BLJB = 0 (i.e. bootloader FM1 executed after a reset) is the default Atmel factory pro-

gramming.

-To read or modify this bit, the APIs are used.

Boot Vector Address (SBV):

- This byte contains the MSB of the user boot loader address in FM0.

- The default value of SBV is FFh (no user boot loader in FM0).

- To read or modify this byte, the APIs are used.

Extra Byte (EB) & Boot Status Byte (BSB):

- These Bytes are reserved for customer use.

- To read or modify these Bytes, the APIs are used.

Figure 21. Hardware Boot Process Algorithm

RESET

BLJB == 0

Bootloader

in FM1

Application

in FM0

bit ENBOOT in AUXR1 Register

Is Initialized with BLJB Inverted.

ENBOOT = 0

PC = 0000h

ENBOOT = 1

PC = F400h

Example, if BLJB=0, ENBOOT

is set (=1) during reset, thus the

bootloader is executed after the

reset.

AT89C5130A-RDTIM Folha de dados(PDF) 45 Page - ATMEL Corporation