Bias Resistor Transistor

NPN Silicon Surface Mount Transistor
with Monolithic Bias Resistor Network

This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-23 package which is designed for low power surface mount applications.

• Simplifies Circuit Design
• Reduces Board Space and Component Count
• The SOT-23 package can be soldered using wave or reflow. The
   modified gull-winged leads absorb thermal stress during soldering
   eliminating the possibility of damage to the die.
• Available in 8 mm embossed tape and reel. Use the Device
   Number to order the 7 inch/3000 unit reel. Replace “T1” with
   “T3” in the Device Number to order the13 inch/10,000 unit reel.
• Pb−Free Package May be Available.
   The G−Suffix Denotes a Pb−Free
   Lead Finish