210

TM

HIP6017

Advanced PWM and Dual Linear Power

Control

The HIP6017 provides the power control and protection for

three output voltages in high-performance microprocessor

and computer applications. The IC integrates a PWM

controller, a linear regulator and a linear controller as well as

the monitoring and protection functions into a single 28 lead

SOIC package. The PWM controller regulates the

microprocessor core voltage with a synchronous-rectified

buck converter. The linear controller regulates power for the

GTL bus and the linear regulator provides power for the

clock driver circuits.

The HIP6017 includes an Intel-compatible, TTL 5-input

digital-to-analog converter (DAC) that adjusts the core PWM

reference and voltage-mode control provide

±1% static

regulation. The linear regulator uses an internal pass device

to provide 2.5V

±2.5%. The linear controller drives an

external N-Channel MOSFET to provide 1.5V

±2.5%.

The HIP6017 monitors all the output voltages. A single

Power Good signal is issued when the core is within

±10% of

the DAC setting and the other levels are above their under-

voltage levels. Additional built-in over-voltage protection for

the core output uses the lower MOSFET to prevent output

voltages above 115% of the DAC setting. The PWM over-

current function monitors the output current by using the

eliminating the need for a current sensing resistor.

Pinout

HIP6017 (SOIC)

TOP VIEW

Features

• Provides 3 Regulated Voltages

- Microprocessor Core, Clock and GTL Power

• Drives N-Channel MOSFETs

• Operates from +3.3V, +5V and +12V Inputs

• Simple Single-Loop PWM Control Design

- Voltage-Mode Control

• Fast Transient Response

- High-Bandwidth Error Amplifier

- Full 0% to 100% Duty Ratios

• Excellent Output Voltage Regulation

- Core PWM Output:

±1% Over Temperature

- Other Outputs:

±2.5% Over Temperature

• TTL-Compatible 5-Bit Digital-to-Analog Core Output

Voltage Selection

• Power-Good Output Voltage Monitor

• Microprocessor Core Voltage Protection Against Shorted

MOSFET

• Over-Voltage and Over-Current Fault Monitors

- Does Not Require Extra Current Sensing Element,

• Small Converter Size

- Constant Frequency Operation

- 200kHz Free-Running Oscillator; Programmable from

50kHz to over 1MHz

Applications

• Full Motherboard Power Regulation for Computers

• Low-Voltage Distributed Power Supplies

NC

NC

VID4

VID3

V33

NC

SS

FAULT/RT

FB2

VCC

PGND

LGATE1

PHASE1

GATE3

COMP1

GND

VOUT2

VIN2

UGATE1

28

27

26

25

24

23

22

21

20

19

18

17

16

15

1

2

3

4

5

6

7

8

9

10

11

12

13

14

PGOOD

VID2

GND2

VSEN1

FB3

VID1

VID0

OCSET1

FB1

Ordering Information

PART NUMBER

TEMP. RANGE

PACKAGE

PKG. NO.

HIP6017CB

0 to 70

28 Ld SOIC

M28.3

HIP6017EVAL1

Evaluation Board

Data Sheet

April 1999

FN4496.1

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 321-724-7143

Copyright © Intersil Americas Inc. 2002. All Rights Reserved