13

TUSB212-Q1

www.ti.com

SLLSF35 – SEPTEMBER 2017

Product Folder Links: TUSB212-Q1

Submit Documentation Feedback

Copyright © 2017, Texas Instruments Incorporated

8.2.2.1.2

For a Device Side Application

1. Configure the TUSB212-Q1 to the desired AC and DC boost settings.

2. Power on (or toggle the RSTN pin if already powered on) the TUSB212-Q1

3. Connect a USB host, the USB-IF device-side test fixture, and USB device to the TUSB212-Q1. Ensure that

the USB-IF device test fixture is configured to the ‘INIT’ position

4. Allow the host to enumerate the device

5. Enable the device to transmit USB TEST_PACKET

6. Using SMA cables, connect the oscilloscope to the USB-IF device-side test fixture and ensure that the

device-side test fixture is configured to the ‘TEST’ position.

7. Execute the oscilloscope USB compliance software.

8. Repeat the above steps in order to re-test TUSB212-Q1 with different AC and DC boost settings.