Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

AT91EB55 Folha de dados(PDF) 9 Page - ATMEL Corporation

Nome de Peças AT91EB55
Descrição Electrónicos  AT91EB55 Evaluation Board
PDF  37 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  ATMEL [ATMEL Corporation]
Página de início  http://www.atmel.com
Logo ATMEL - ATMEL Corporation

AT91EB55 Folha de dados(HTML) 9 Page - ATMEL Corporation

Back Button AT91EB55 Datasheet HTML 5Page - ATMEL Corporation AT91EB55 Datasheet HTML 6Page - ATMEL Corporation AT91EB55 Datasheet HTML 7Page - ATMEL Corporation AT91EB55 Datasheet HTML 8Page - ATMEL Corporation AT91EB55 Datasheet HTML 9Page - ATMEL Corporation AT91EB55 Datasheet HTML 10Page - ATMEL Corporation AT91EB55 Datasheet HTML 11Page - ATMEL Corporation AT91EB55 Datasheet HTML 12Page - ATMEL Corporation AT91EB55 Datasheet HTML 13Page - ATMEL Corporation Next Button
Zoom Inzoom in Zoom Outzoom out
 9 / 37 page
background image
AT91EB55 Evaluation Board User Guide
3-1
Section 3
The On-board Software
3.1
AT91EB55
Evaluation Board
The AT91EB55 Evaluation Board contains an AT49BV16X4 Flash device programmed
with default software. Only the lowest eight 8-Kbyte sectors are used. The remaining
sectors are user-definable and can be programmed using one of the Flash downloader
solutions offered in the AT91 library.
When delivered, the Flash device contains:
 The Boot Software Program
 The Functional Test Software
 The SRAM Downloader
 The Angel Debug Monitor
 A Default User Boot with a Default Application
The boot, FTS and SRAM downloader are in sectors 0 and 1 of the Flash. These sec-
tors are not locked for an easy on-board upgrade. The user must avoid overwriting this
sector.
3.2
The Boot
Software
Program
The Boot Software Program configures the AT91M55800A and thus controls the mem-
ory and other board devices.
The Boot Software Program is started at reset if JP1 is in the STD position. If JP1 is in
the USER position, the AT91M55800A boots from address 0x01010000 in the Flash,
which must have a user-defined boot.
The Boot Software Program first initializes the master clock frequency at 32 MHz, the
EBI, then executes the REMAP and checks the state of the buttons as described below.
As long as the SW1 button is pressed:
 All the LEDs light together
 The D1 LED remains lit until SW1 is released
 The Functional Test Software (FTS) is started
As long as the SW2 button is pressed:
 All the LEDs light together
 The D2 LED remains lit until SW2 is released
 The SRAM downloader is activated
When the SW4 button is pressed:
 The shutdown function from AT91M55800A is activated. The power-up can be
achieved by pressing the S1 push button only (Wake-up function)



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37


Folha de dados Download

Go To PDF Page


Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com