| Os motores de busca de Datasheet de Componentes eletrônicos |
|
R5F11MMDA Folha de dados(PDF) 25 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R5F11MMDA Folha de dados(HTML) 25 Page - Renesas Technology Corp |
|
25 / 83 page ![]() RL78/L1A 2. ELECTRICAL SPECIFICATIONS (A: TA = -40 to +85 °C) R01DS0280EJ0100 Rev. 1.00 Page 25 of 80 Aug 12, 2016 Note 1. Total current flowing into VDD, including the input leakage current flowing when the level of the input pin is fixed to VDD or VSS. The values below the MAX. column include the peripheral operation current. However, not including the current flowing into the LCD controller/driver, A/D converter, D/A converter, ail to rail OPA(with analog MUX), General-purpose OPA, voltage reference, low-resistance switch, comparator, LVD circuit, I/O port, and on-chip pull-up/pull-down resistors and the current flowing during data flash rewrite. Note 2. During HALT instruction execution by flash memory. Note 3. When high-speed on-chip oscillator and subsystem clock are stopped. Note 4. When high-speed system clock and subsystem clock are stopped. Note 5. When high-speed on-chip oscillator and high-speed system clock are stopped. When RTCLPC = 1 and setting ultra-low current consumption (AMPHS1 = 1). The current flowing into the real-time clock 2 is included. However, not including the current flowing into the 12-bit interval timer, 8-bit interval timer, and watchdog timer. Note 6. Not including the current flowing into the real-time clock 2, 12-bit interval timer, 8-bit interval timer, and watchdog timer. Note 7. Relationship between operation voltage width, operation frequency of CPU and operation mode is as below. HS (high-speed main) mode: 2.7 V VDD 3.6 V@1 MHz to 24 MHz 2.4 V VDD 3.6 V@1 MHz to 16 MHz LS (low-speed main) mode: 1.8 V VDD 3.6 V@1 MHz to 8 MHz Note 8. Regarding the value for current to operate the subsystem clock in STOP mode, refer to that in HALT mode. Remark 1. fMX: High-speed system clock frequency (X1 clock oscillation frequency or external main system clock frequency) Remark 2. fIH: Frequency when the high-speed on-chip oscillator (24 MHz max.) Remark 3. fSUB: Subsystem clock frequency (XT1 clock oscillation frequency) Remark 4. Except subsystem clock operation, temperature condition of the TYP. value is TA = 25°C |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |