STPMS2 datasheet(5/36 Pages) STMICROELECTRONICS

5 / 36 page

STPMS2

Introduction

DocID16525 Rev 5

5/36

Introduction

The STPMS2 is a device designed to measure electrical line parameters (voltage and

current) via analog signals from voltage sensors (current divider) and current sensors

(inductive Rogowski coil, current transformer or shunt resistors). The device is used

together with a digital signal processing circuit to implement an effective measuring system

for multi-phase power meters. The device consists of two analog measuring channels,

consisting of second-order sigma-delta modulators with an appropriate non-overlapping

control signal generator. The STPMS2 also includes a temperature compensated bandgap

reference voltage generator, a low drop supply voltage stabilizer and a minimal digital

circuitry that includes BIST (built-in self-test) structures. In a current signal processing

channel, a low-noise preamplifier is included in front of the sigma-delta converter. All

reference voltages (bandgap, AGND) are internally buffered to eliminate channel crosstalk.

The STPMS2 can operate in fast or low-power mode. In fast mode, a nominal clock

frequency of 4.1 or 4.9 MHz is applied to the clock input. In this mode, signal bandwidth is

specified between 0 and 4 kHz. In low-power mode, the nominal clock is four times slower

in order to reduce the power consumption of the circuit. In low-power mode, the quiescent

bias currents of the preamplifier and sigma-delta integrators are lowered and the signal

bandwidth is narrowed to the frequency bandwidth from 0 to 1 kHz.

STPMS2 Folha de dados(PDF) 5 Page - STMicroelectronics