ZDI232ZPAK2ZPK datasheet(8/10 Pages) ZILOG

8 / 10 page

ZDI232ZPAK2ZPK

ZiLOG ZPAK II Debug Interface Module

Page 8

UM016301-1003

Configure the Hardware

created buffer Pool 1524 32

created buffer Pool 4096 8

IP Address: 192.168.1.50

IP Subnet: 192.168.1.0/255.255.255.0

IP Gateway: 192.168.1.254

netstart exiting, stack extent 379/2048

ZPAKII version y.y

ZPAKII Console version 1.5

Type 'H' for help

ZPAKII:>

In the example output above, x.x.x denotes the current version of the TCP/IP

stack software, and y.y denotes the current version of ZPAK II. The console

prompt is not case-sensitive.

7. At the ZPAKII prompt, enter H and press ENTER. The following message should

appear:

ZPAKII:> H

display this Help

change Ipaddress

change ipSubnet mask

change ipGateway

change Portnumber

change dtli Variable count

change dtli Buffer size

load deFault settings

display Current settings

toggle pAssword

toggle Dhcp option

change passWord

Reset zpakii

ZPAKII:>

8. Use the I command to change the ZPAK II’s IP address to one that is compatible with

the PC. Use caution to avoid creating a conflicting IP address.

9. Use the S command to change the ZPAK II’s subnet mask to one that is compatible

with the PC. Typically, the subnet mask is the same as that of the PC.

Note:

ZDI232ZPAK2ZPK Folha de dados(PDF) 8 Page - Zilog, Inc.