Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

L99MM70XP Folha de dados(PDF) 29 Page - STMicroelectronics

Nome de Peças L99MM70XP
Descrição Electrónicos  INH input for external CAN transceiver
PDF  68 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  STMICROELECTRONICS [STMicroelectronics]
Página de início  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

L99MM70XP Folha de dados(HTML) 29 Page - STMicroelectronics

Back Button L99MM70XP Datasheet HTML 25Page - STMicroelectronics L99MM70XP Datasheet HTML 26Page - STMicroelectronics L99MM70XP Datasheet HTML 27Page - STMicroelectronics L99MM70XP Datasheet HTML 28Page - STMicroelectronics L99MM70XP Datasheet HTML 29Page - STMicroelectronics L99MM70XP Datasheet HTML 30Page - STMicroelectronics L99MM70XP Datasheet HTML 31Page - STMicroelectronics L99MM70XP Datasheet HTML 32Page - STMicroelectronics L99MM70XP Datasheet HTML 33Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 29 / 68 page
background image
L99MM70XP
Protection and diagnosis
Doc ID 022637 Rev 2
29/68
If the output current exceeds the current shutdown threshold the output transistor is turned
off and the corresponding diagnosis bit of the output is latched. The status can be read and
cleared from SPI. If the overcurrent recovery mode is set for this output, the output is
switched on again in order to provide a soft start function (see Section 3.10.5:
Programmable soft start function) and the status bit is cleared automatically. Otherwise the
output stays off until the status bit is cleared.
The outputs are automatically switched off in case of passive mode, VS undervoltage, VS
overvoltage, thermal shutdown (TSD1 and TSD2) or stuck at 1/0 condition at DI.
4.5
High-side driver outputs
The device provides a total of 4 high-side outputs OUT6,7,8,9 to drive LED or defroster.
The high-side outputs are protected against
●
Overvoltage and undervoltage (can be masked by SPI)
●
Overload (short circuit)
●
Overtemperature with pre warning
If the output current exceeds the current shutdown threshold the output transistor is turned
off and the corresponding diagnosis bit of the output is latched. The status can be read and
cleared from SPI. If the overcurrent recovery mode is set for this output, the output is
switched on again in order to provide a soft start function (see Section 3.10.5:
Programmable soft start function) and the status bit is cleared automatically. Otherwise the
output stays off until the status bit is cleared.
The outputs are automatically switched off in case of passive mode, VS undervoltage, VS
overvoltage, thermal shutdown (TSD1 and TSD2) or stuck at 1/0 condition at DI.
Note:
Loss of ground or ground shift with externally grounded loads: ESD structures are
configured for nominal currents only. If external loads are connected to different grounds, the
current load must be limited to this nominal current.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68


Folha de dados Download

Go To PDF Page


Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com