Unless otherwise noted, V

in boldface type apply over the entire junction temperature range for operation, T

Symbol

Parameter

Conditions

Typical

Limit

Units

Min

Max

I

t

CLK-HP

CLK High Period

(Note 7)

0.6

µs

t

SU

Set-Up Time Repeated

START Condition

(Note 7)

0.6

µs

t

DATA-HOLD

Data Hold Time

(Note 7)

300

ns

t

DATA-SU

Data Set-Up Time

(Note 7)

100

ns

t

SU

Set-Up Time for STOP

Condition

(Note 7)

0.6

µs

t

TRANS

Maximum Pulse Width of

Spikes that Must Be

Suppressed by the Input

Filter of Both DATA & CLK

Signals

(Note 7)

50

ns

Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions under which operation of the device

is guaranteed. Operating Ratings do not imply guaranteed performance limits. For guaranteed performance limits and associated test conditions, see the Electrical

Characteristics tables.

Note 2: All voltages are with respect to the potential at the GND pin.

Note 3: The part cannot dissipate more than 400mW.

Note 4: The human-body model is 100 pF discharged through 1.5 k

Ω. The machine model is 0Ω in series with 100 pF.

guaranteed by correlating the electrical characteristics to process and temperature variations and applying statistical process control.

Note 6: Each LED pin should not exceed 25 mA and each octal (LED0–LED7; LED8–LED15) should not exceed 100 mA. The package should not exceed a total

of 200 mA.

Note 7: Guaranteed by design.

Typical Performance Characteristics

Frequency vs. Temp

(T

V

20079617

www.national.com

5