AT91EB42 datasheet(5/30 Pages) ATMEL

5 / 30 page

AT91EB42 Evaluation Board User Guide

1-1

Section 1

Overview

1.1

Scope

The AT91EB42 Evaluation Board enables real-time code development and evaluation.

It supports the AT91M42800.

This guide focuses on the AT91EB42 Evaluation Board as an evaluation and demon-

stration platform:

Section 1 provides an overview.

Section 2 describes how to set up the evaluation board.

Section 3 details the on-board software.

Section 4 contains a description of the circuit board.

Section 5 and Section 6 are two appendices covering configuration straps and

schematics, including pin connectors.

1.2

Deliverables

The evaluation board is delivered with a DB9 plug-to-DB9 socket straight-through serial

cable to connect the target evaluation board to a PC. A bare power lead with a 2.1 mm

jack on one end for connection to a bench power supply is also delivered.

The evaluation board is also delivered with a CD-ROM that contains an evaluation ver-

sion of the software development toolkit and the documentation that outlines the AT91

microcontroller family.

The evaluation board is capable of supporting different kinds of debugging systems,

using an ICE interface or the on-board Angel Debug Monitor. Refer to the AT91EB42

Getting Started Tutorial documents for recommendations on using the evaluation board

in a full debug environment.

1.3

The AT91EB42

Evaluation Board

The board consists of an AT91M42800 together with several peripherals:

Two serial ports

Reset push button

Four user-defined push buttons

Eight LEDs

a 256 KB 16-bit SRAM (upgradeable to 1M byte)

a 2 MB 16-bit Flash (of which 1M byte is available for user software)

a 4 MB Serial Data Flash

a 64 KB Serial EEPROM

a 32 KB SPI EEPROM

AT91EB42 Folha de dados(PDF) 5 Page - ATMEL Corporation