LP064V1 LIQUID CRYSTAL DISPLAY

SPECIFICATIONS

TITLE: LP064V1 REV. 1 PAGE 2 OF 2

DATA DISPLAY AG

Industriestrasse 1

D-82110 Germering

MAY 2001

http://www.datadisplay.de

Tel.: +49-89-894450-0

Fax: +49-89-894450-90

1.

GENERAL DESCRIPTION

The LG.Philips LCD model LP064V1 LCD is a Color Active Matrix Liquid Crystal

Display with an integral Cold Cathode Fluorescent Tube(CCFT) back light system.

The matrix employs a-Si Thin Film Transistor as the active element. It is a

transmissive type display operating in the normally white mode. This TFT-LCD has a

6.4 inch diagonally measured active display area with VGA resolution(480 vertical by

640 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-

pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of

the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus,

presenting a pallete of more than 262,144 colors. The LP064V1 LCD is intended to

support applications where low power consumption, weight and thickness are critical

factors and graphic displays are important. In combination with the vertical arrangement

of the sub-pixels, the LP064V1 characteristics provide an excellent flat panel display for

office automation products such as portable computers and measurement equipment.

Column Driver (UP)

Column Driver (DOWN)

640 x RGB x 480

TFT LCD Array

Power Supply

DC/DC

+5V

R[0:5]

G[0:5]

B[0:5]

CLK

HSYNC

VSYNC

DTMG

VSS

INVERTER

VSS

+12V

B/L

CN

General Display Characteristics

The following are general features of model LP064V1 LCD:

Active display area:

Outsize dimensions:

Pixel pitch:

Pixel format

Color depth:

Display operating mode:

Surface treatment:

6.4 inches (cm) diagonal

168W x 123H x 9.0D mm Typ.

0.204 mm * 0.204 mm

640 hor. By 480 ver. Pixels

RGB stripe arrangement

6-bit

transmissive mode, normally white

hard coating (2H),

anti-glare treatment of the front polarizer