9

Hardware configuration

M9391A PXI VSA

Description

Model-Option

Additional information

M9391A-F03 or -F06

3 GHz or 6 GHz frequency range

One required

M9391A-B04 or -B10 or -B16

40 MHz, 100 MHz or 160 MHz analysis bandwidth

One required. B16 recommended for fast

spectrum measurements with 89600 VSA

software – option SSA.

M9391A-300

PXIe frequency reference

Recommended

M9391A-UNZ

Fast tuning

Recommended. Highly recommended for

fastest spectrum measurements with 89600

VSA software – option SSA

M9391A-M01 or -M05 or -M10

Memory options (512MB, 2GB, or 4GB)

Recommend 1Gsa/4GB memory

Single acquisition

Contains one continuous block of captured data collected using predefined

capture settings. The capture period can be defined by test engineers to

suit the requirements for specific device tests, for example, the number of

GSM bursts required to provide the engineer with enough data to ensure a

good measurement on the DUT.

Combined measurements

Implies that the measurement sequence performed by the analyzer can

accommodate any mix of transmitter power measurements and modulation

quality measurements performed on the data collected within the capture

period.

Single acquisition

combined measurements

The M9071A-XTP single acquisition

combined GSM/EDGE measurement

application is for high-speed

manufacturing of GSM/EDGE

mobile phone transmitters, wireless

components, such as power amplifiers,

and low-cost pico/femtocell base

stations. Used with the PXI VSAs,

it provides up to 20 times speed

improvement compared to traditional

one-button measurements for phase

and frequency error (PFER), EDGE EVM,

PvT, ORFS, marker measurements, and

harmonics. Note that the M9071A-XTP

does not provide the N9071A-XTP's

List Power Step measurement feature.

Instead you can get better performance

using the M9391A and M9393A PXI VSA

hardware driver's List Power feature.

M9393A PXI Performance VSA

Description

Model-Option

Additional information

M9393A-F08, -F14, -F18 or -F27

8 GHz, 14 GHz, 18 GHz or 27 GHz frequency range

One required

M9393A-B04 or -B10 or -B16

40 MHz, 100 MHz or 160 MHz analysis bandwidth

One required. B16 recommended for fast

spectrum measurements with 89600 VSA

software – option SSA.

M9393A-300

PXIe frequency reference

Recommended

M9393A-UNZ

Fast tuning

Recommended. Highly recommended for

fastest spectrum measurements with 89600

VSA software – option SSA

M9393A-M01 or -M05 or -M10

Memory options (512MB, 2GB, or 4GB)

Recommend 1Gsa/4GB memory