LB115S

115W Single Output

LED Series

www.slpower.com

LB115S 2-OCT-14

4

EMI/EMC Compliance

PARAMETER

SPECIFICATION

NOTES

Conducted Emissions:

EN55011/22 Class B; FCC Part 15

Also meets EN55015 Class B

Radiated Emissions:

EN55011/22 Class A; FCC Part 15

Harmonic Current

Emissions

EN61000-3-2, Class A,B,C &D

Meets class C from 5 to 115 Watts.

This is based on limits set @ 115 Watt

Voltage Fluctuations &

Flicker

EN61000-3-3

Static Discharge

Immunity:

EN61000-4-2, Level 4: 6kV contact, 8kV air,

Criteria A

Performance criteria are defined as

following:

A – Normal performance

during and after the test

B – Temporary degradation,

self-recoverable

C – Temporary degradation,

operator intervention required

to recover the operation

RF Field Susceptibility

EN61000-4-3, Level 3 (3V/m), Criteria A

Fast Transients/Bursts

EN61000-4-4, Level 3 (PS: 2kV-40A, other

lines 1kV-20A), Criteria A

Surge susceptibility

EN61000-4-5, Installation Class 3 (1kV diff.

mode, 2kV common mode), Criteria A

Conducted RF

susceptibility

Power Frequency

Magnetic Field Test

EN61000-4-8, Level 3 (3A/m), Criteria A

Voltage Sags & Surges

EN61000-4-11,

95% dip/0.5 cycle (Criteria A),

60%/5cycles (Criteria B ), 30%/25 cycles

(Criteria A).

loading is 70% of 100 watts with 100 Vac

input.

Notes:

1. Specifications subject to change without notice.

2. Specifications are for convection rating at factory settings with 115Vac input and 25°C ambient unless

otherwise stated.