UCD3138RGCT datasheet(36/89 Pages) TI1

36 / 89 page

All are S0.23

Saturate

S2.23

S0.23

Shifter

S0.23

Yn Scale

Clamp

S0.23

Filter Yn

Clamp High

Filter Yn

Clamp Low

Filter Yn

Kp Coef

Xn-1 Reg

Clamp

Kd yn_reg

Kd alpha

Limit Comparator

PID Filter Branch Stages

Ki High

EADC_DATA

Ki Coef

Kd coef

Limit 5

Limit 6

…..

Limit 0

Coefficient

select

Ki Low

Optional

Selected

KI_ADDER_

MODE

Clamp

Ki_yn reg

Round

n-1

–

UCD3138

SLUSAP2G – MARCH 2012 – REVISED SEPTEMBER 2016

www.ti.com

Submit Documentation Feedback

Product Folder Links: UCD3138

Detailed Description

Here is the first section of the Filter :

Figure 6-6. First Section of the Filter

The filter input, Xn, generally comes from a front end. Then there are three branches, P, I. and D. Note

that the D branch also has a pole, Kd Alpha. Clamps are provided both on the I branch and on the D

alpha pole.

The filter also supports a nonlinear mode, where up to 7 different sets of coefficients can be selected

depending on the magnitude of the error input Xn. This can be used to increase the filter gain for higher

errors to improve transient response.

Here is the output section of the filter (S0.23 means that there is 1 sign bit, 0 integer bits and 23 fractional

bits):

Figure 6-7. Output Section of the Filter

UCD3138RGCT Folha de dados(PDF) 36 Page - Texas Instruments

UCD3138RGCT Folha de dados(HTML) 36 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89

Folha de dados Download

Ligação URL