Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

LP5523TMX/NOPB Folha de dados(PDF) 30 Page - Texas Instruments

Click here to check the latest version.
Nome de Peças LP5523TMX/NOPB
Descrição Electrónicos  LP5523 Programmable 9-Output LED Driver
PDF  56 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  TI1 [Texas Instruments]
Página de início  http://www.ti.com
Logo TI1 - Texas Instruments

LP5523TMX/NOPB Folha de dados(HTML) 30 Page - Texas Instruments

Back Button LP5523TMX/NOPB Datasheet HTML 26Page - Texas Instruments LP5523TMX/NOPB Datasheet HTML 27Page - Texas Instruments LP5523TMX/NOPB Datasheet HTML 28Page - Texas Instruments LP5523TMX/NOPB Datasheet HTML 29Page - Texas Instruments LP5523TMX/NOPB Datasheet HTML 30Page - Texas Instruments LP5523TMX/NOPB Datasheet HTML 31Page - Texas Instruments LP5523TMX/NOPB Datasheet HTML 32Page - Texas Instruments LP5523TMX/NOPB Datasheet HTML 33Page - Texas Instruments LP5523TMX/NOPB Datasheet HTML 34Page - Texas Instruments Next Button
Zoom Inzoom in Zoom Outzoom out
 30 / 56 page
background image
LP5523
SNVS550D – SEPTEMBER 2009 – REVISED MAY 2013
www.ti.com
27 D2 CURRENT CONTROL to 2E D9 CURRENT CONTROL
•
The control registers and control bits for D2 output up to D9 output are similar to that given to D1 output.
36 MISC
•
This register contains miscellaneous control bits.
–
36 — Bit [7] VARIABLE_D_SEL
–
Variable D source selection.
–
1 = variable D source is the LED test ADC output (LED TEST ADC). This allows, for example, program
execution control with analog signal.
–
0 = variable D source is the register 3C (VARIABLE).
–
36 — Bit [6] EN_AUTO_INCR
–
The automatic increment feature of the serial bus address enables a quick memory write of successive
registers within one transmission.
–
1 = serial bus address automatic increment is enabled.
–
0 = serial bus address automatic increment is disabled.
–
36 — Bit [5] POWERSAVE_EN
–
1 = power save mode is enabled.
–
0 = power save mode is disabled. See section “Automatic Power-Save Mode” for further details.
–
36 — Bits [4:3] CP_MODE
–
Charge pump operation mode.
–
00 = OFF.
–
01 = forced to bypass mode (1x).
–
10 = forced to 1.5x mode; output voltage is boosted to 4.5V.
–
11 = automatic mode selection.
–
36 — Bit [2] PWM_PS_EN
–
Enables PWM powersave operation. Significant power savings can be achieved, for example, during ramp
instruction.
–
36 — Bits [1:0] CLK_DET_EN and INT_CLK_EN
–
Program execution is clocked with internal 32.7 kHz clock or with external clock. Clocking is controlled
with bits INT_CLK_EN and CLK_DET_EN in the following way:
–
00 = forced external clock (CLK pin).
–
01 = forced internal clock.
–
10 = automatic selection.
–
11 = internal clock.
–
External clock can be used if a clock signal is present on CLK-pin. External clock frequency must be 32.7
kHz for correct operation. If a higher or a lower frequency is used, it will affect on the program execution
engine operation speed. The detector block does not limit the maximum frequency. External clock status
can be checked with read only bit EXT_CLK_USED in register address 3A, when the external clock
detection is enabled (Bit [1] CLK_DET_EN = high).
–
If external clock is not used in the application, CLK pin should be connected to GND to avoid oscillation on
this pin and extra current consumption.
37 ENGINE1 PC
•
Program counter starting value for program execution engine 1; A value from 0000000 to 1011111. The
maximum value depends on program memory allocation between the three program execution engines.
38 ENGINE2 PC
•
38 — Bits [6:0] PC
–
Program counter starting value for program execution engine 2; A value from 0000000 to 1011111.
39 ENGINE3 PC
•
39 — Bits [6:0] PC
–
Program counter starting value for program execution engine 3; A value from 0000000 to 1011111.
30
Submit Documentation Feedback
Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: LP5523



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56


Folha de dados Download

Go To PDF Page


Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com