Product Specification

(.0315”) Q Strip

Revision: C

Date: November 11, 2015

© Samtec, Inc.

Page 2

1.0 SCOPE

1.1 This specification covers performance, testing and quality requirements for Samtec QSE/QTE Series 0,80 mm

(.0315”) Q Strip

®

High Speed Socket/Terminal Strip connector system. These socket and terminal strips are

available in Vertical and Edge Mount configurations for parallel, perpendicular and co-planar board-to-board

applications. All information contained in this specification is for a 5 mm mated height vertical configuration unless

otherwise noted.

2.0 DETAILED INFORMATION

2.1 Product prints, footprints, catalog pages, test reports and other specific, detailed information can be found at

www.samtec.com?QSE and www.samtec.com?QTE.

3.0 TESTING

3.1 Current Rating: Signal: 2A (One Pin Powered Per Row); Ground: 11.6A (One Pin Powered Per Row)

3.2 Voltage Rating: 225 VAC

3.3 Operating Temperature Range: -55°C to +125°C

3.4 Operating Humidity Range: 90% to 95% (Per EIA-364-31)

3.5 Electrical:

ITEM

TEST CONDITION

REQUIREMENT

STATUS

Withstanding Voltage

EIA-364-20 (No Flashover,

Sparkover, or Breakdown)

675 VAC

Pass

Insulation Resistance

EIA-364-21 (1000 MΩ

minimum)

5,000 MΩ

Pass

Contact Resistance

(LLCR)

EIA-364-23

Δ 15 mΩ maximum

(Samtec defined)/ No damage

Pass

3.6 Mechanical:

ITEM

TEST CONDITION

REQUIREMENT

STATUS

Durability

EIA-364-09C

500 cycles (10µ" Au)

Pass

Random Vibration

EIA-364-28 Condition V, Letter B

7.56 G 'RMS', 50 to 2000 Hz, 2

hours per axis, 3 axis total , PSD

0.04

Visual Inspection: No Damage

LLCR: Δ 15 mΩ maximum

Event Detection: No interruption >

50 Nanoseconds

Pass

Mechanical Shock

EIA-364-27 100 G, 6

milliseconds, sawtooth wave,

11.3 fps, 3 shocks/direction, 3

axis (18 total shocks)

Visual Inspection: No Damage

LLCR: Δ 15 mΩ maximum

Event Detection: No interruption >

50 Nanoseconds

Pass

Normal Force

EIA-364-04

30 grams minimum for gold

interface

Pass