DAC5686IPZP datasheet(47/53 Pages) TI1

47 / 53 page

IOUT1

1:1

IOUT2

Ω

RLOAD

Ω

100

Ω

AVDD (3.3 V)

S0033-01

IOUT1

4:1

IOUT2

100

Ω

100

Ω

RLOAD

Ω

AVDD (3.3 V)

S0033-02

SLEEP MODE

POWER-UP SEQUENCE

DAC5686

www.ti.com ............................................................................................................................................................ SLWS147F – APRIL 2003 – REVISED JUNE 2009

Figure 51. Driving a Doubly Terminated 50-

Ω Cable Using a 1:1 Impedance-Ratio Transformer

Figure 52. Driving a Doubly Terminated 50-

Ω Cable Using a 4:1 Impedance-Ratio Transformer

The DAC5686 features a power-down mode that turns off the output current and reduces the supply current to

less than 5 mA over the supply range of 3 V to 3.6 V and temperature range of –40C to 85C. The power-down

mode is activated by applying a logic level 1 to the SLEEP pin (e.g., by connecting pin SLEEP to IOVDD). An

internal pulldown circuit at node SLEEP ensures that the DAC5686 is enabled if the input is left disconnected.

Power-up and power-down activation times depend on the value of the external capacitor at node SLEEP. For a

nominal capacitor value of 0.1 mF, it takes less than 5 ms to power down and approximately 3 ms to power up.

In all conditions, bring up DVDD first. If PLLVDD is powered (PLL on), CLKVDD should be powered before or

simultaneously with PLLVDD. AVDD, CLKVDD and IOVDD can be powered simultaneously or in any order.

Within AVDD, the multiple AVDD pins should be powered simultaneously.

Submit Documentation Feedback

Product Folder Link(s): DAC5686

DAC5686IPZP Folha de dados(PDF) 47 Page - Texas Instruments

DAC5686IPZP Folha de dados(HTML) 47 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

Folha de dados Download

Ligação URL