|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

2015-07-0017

PT0472-3

08/05/15

5

PI3CH401

4-Bit Bus Switch, Enable High

1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug

Switch Positions

Test

Switch

6.0V

GND

Prop Delay

Open

Test Circuit for Dynamic Electrical Characteristics

Switching Waveforms

Voltage Waveforms Enable and Disable Times

Applications Information

Logic Inputs

The logic control inputs can be driven up to 3.6V regardless of the supply voltage. For example, given a +3.3V supply, EN

Hot Insertion

For Datacom and Telecom applications that have ten or more volts passing through the backplane, a high voltage from the

power supply may be seen at the device input pins during hot insertion. The PI3CH401 devices have maximum limits of 6V

and 120mA for 20ns. If the power is higher or applied for a longer time or repeatedly reaches the maximum limits, the devices

can be damaged.

Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.