1

3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)

DF7 Series

2004.7

1. Complete Locking Function

Reliable interior lock protects mated connectors from

accidental disconnection.

2. Increased Contact Retention of Crimped

Contacts and Prevention of Incomplete

Insertion

Separate contact retainer increases the contact

retention, assures and visually confirms the complete

contact insertion.

3. Molded-in Contact Retention Tabs

Handling of terminated contacts during the assembly and

termination is easier and avoids entangling of wires,

since there are no protruding metal tabs.

4. Incorrect Insertion Prevention

Connectors are polarized to assure correct mating with

corresponding parts.

5.Solder Crack Prevention

Glass reinforced resin is used in the pin header bodies to

prevent solder cracks caused by the heat shrinkage.

6. Prevention of Incorrect Board Placement

Built-in locating posts assure correct connector

placement and orientation on the board.(2-12 pos.)

7. Supports Sealing after Installation.

Sealing compound can be applied to the board installed

connector for distance of 6 mm max. from the mounting

surface (9 mm max. for single position).

8.Cost Effective Tooling

The same crimping tools are used to terminate socket

and pin contacts.

9. Prevention of Shor t Circuits between

Adjacent Contacts

Each contact is completely surrounded by the insulator

housing, electrically isolating it from adjacent contacts.

Completely

enclosed

locking system

Complete

Locking

Function

Board Eyelet mounting

One pos. type can also be mounted

to boards that have eyelets.

Continued.

Guide post

Prevention of

Incorrect Connections

Full barrier

between adjacent

contacts.