1

High Performance Amplifier,

21 dB Gain, 10 - 500 MHz

Rev. V3

AM-146/AMC-146

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 4 dB Typical Midband Noise Figure

 +38 dBm Typical Midband Third Order Intercept

 +24 dBm Typical Midband 1 dB Compression

Description

M/A-COM’s AM-146 is a coupler feedback amplifier

with high intercept and compression points. The use

of coupler feedback minimizes current in a high

intercept amplifier. This amplifier is packaged in a

flatpack with flanges. Due to the metal flatpack the

thermal rise minimized. The ground plane on the PC

board should be configured to remove heat from

under the package. AM-146 is ideally suited for use

where a high intercept, high reliability amplifier is

required.

FP-9

Parameter

Absolute Maximum

Max. Input Power

+10 dBm

Vbias

+15.75 V

Operating Temperature

-55°C to +85°C

Storage Temperature

-65°C to +125°C

1. Operation of this device above any one of these parameters

may cause permanent damage.

C-25

Pin No.

Function

Pin No.

Function

1

RF OUT

6

RF IN

2

GND

7

GND

3

GND

8

GND

4

GND

9

GND

5

VDC

10

VDC

Pin Configuration