SPT01-335DEE datasheet(8/16 Pages) STMICROELECTRONICS

Nome de Peças	SPT01-335DEE

Descrição Electrónicos	Automation sensor transient and overvoltage protection

PDF	16 Pages

Scroll/Zoom	100%

Fabricante Electrônico	STMICROELECTRONICS [STMicroelectronics]

Página de início	http://www.st.com

Logo

8 / 16 page

Evaluation of the clamping voltage

SPT01-335DEE

8/16

DocID15200 Rev3

Evaluation of the clamping voltage

VBR (TJ) = VBR (25) x (1+ αT (TJ – 25))

VCL MAX (8/20 µs) = VBR MAX + RD x IPP

5.1

Application considerations

5.1.1

Demagnetization of an inductive load driven by the switch protection

diode

The turn off energy EOFF that could be dissipated in the D1 diode is calculated as shown in

AN587 and AN1351 application notes:

EOFF = VBR x L x [VCC + (VCC - VBR) x ln (VBR / (VBR - VCC))] / (RS)²

tOFF = L x ln (VBR / (VBR - VCC)) / RS

POFF = EOFF / tOFF

With L = 1 H; I = 0.3 A; VBR = 39 V; VCC = 30 V, RS = 100 Ω the stress withstood by D1

becomes:

EOFF = 65 mJ; tOFF = 15 ms; POFF = 4.3 W

In a single pulse mode operation, the junction temperature can be fairly estimated:

TJ = Tamb + [Zth (tOFF) x POFF]

In a repetitive operation with an F repetitive rate,

PAV = EOFF x F

T(J_AV) = Tamb + PAV x Rth(j-a)

And during the demagnetization tOFF, TJ_PK < TJ_AV + POFF x Zth (tOFF)

ZTH is the transient thermal impedance of each diode for a pulse having a duration tOFF.

Figure 12. Electrical diagram for inductive load demagnetization

Load

Switch

SPT01-335DEE Folha de dados(PDF) 8 Page - STMicroelectronics