TMP75C datasheet(21/31 Pages) TI

Nome de Peças	TMP75C

Descrição Electrónicos	TMP75C 1.8-V Digital Temperature Sensor with Two-Wire Interface and Alert

PDF	31 Pages

Scroll/Zoom	100%

Fabricante Electrônico	TI [Texas Instruments]

Página de início	http://www.ti.com

Logo

21 / 31 page

Serial Bus Traces

Pull-Up Resistors

Supply Bypass

Capacitor

Via to Power or Ground Plane

Via to Internal Layer

Supply Voltage

SDA

SCL

ALERT

GND

Ground Plane for

Thermal Coupling

to Heat Source

Heat Source

TMP75C

www.ti.com

SBOS707B – APRIL 2014 – REVISED AUGUST 2014

10 Layout

10.1 Layout Guidelines

Place the power-supply bypass capacitor as close as possible to the supply and ground pins. The recommended

value of this bypass capacitor is 0.01

μF. Additional decoupling capacitance can be added to compensate for

noisy or high-impedance power supplies.

Pull up the open-drain output pins (SDA and ALERT) to a supply voltage rail (VS or higher but up to 3.6 V)

through 10-k

Ω pull-up resistors.

10.2 Layout Example

Figure 20. Layout Example

Submit Documentation Feedback

Product Folder Links: TMP75C

TMP75C Folha de dados(PDF) 21 Page - Texas Instruments