Product Datasheet

www.Applied-Motion.com

SVAC3-S-E220

Digital Servo Drive w/ Ethernet

1pc. - 471.00

50pc. - 353.25

Product Features

Digital servo drive in a compact package

DSP-based current control

Operates from 220 VAC

Provides motor current up to 1.8 A rms continuous,

3.75 A rms peak

Fast 10/100 Ethernet for programming and

communications

Three pulse-based control modes: step & direction,

A/B quadrature, CW/CCW pulse

Velocity (oscillator) control mode with sophisticated

joystick operation

Streaming serial command mode (SCL) for

commands sent from a host controller

UDP & TCP support

4 digital inputs, 2 digital outputs, all optically

isolated

1 analog input, +/-10 volt range

Jerk filter for S-curve acceleration ramps

Applied Motion Products, Inc.

404 Westridge Dr.

Watsonville, CA 95076, USA

1-800-525-1609

Tel (831) 761-6555

Fax (831) 761-

6544

The SVAC3-S-E220 is a compact and cost-effective servo drive that is compatible with a variety of servo motors

and a great choice for many OEM applications. Its all-digital design and DSP-based current control allow for

smooth motion and a quick response from the specially matched set of Applied Motion motors available with it.

Power to the drive comes from single-phase 220 VAC and the drive can output up to 1.8 A rms continuous, 3.75 A

rms peak to the servo motor. The drive also has built-in protection features like over-voltage, over-temperature,

and over-current, which prevent damage to the drive while running in adverse conditions.

The SVAC3-S-E220 can operate in analog torque/velocity, pulse & direction, and streaming serial (SCL) control

modes. Select the control mode, tune the servo motor and configure the drive using the Quick Tuner™ software.

For connecting to external devices such as limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and

other devices, the drive comes with 4 digital inputs, 2 digital outputs, and 1 analog input. The drive also features

an Ethernet port for configuration and communications. The Ethernet port is fast 10/100 Mbit, and the drive

supports both TCP and UDP communication protocols.

This servo motor drive is UL Recognized (File No. E332730), CE approved, and RoHS compliant.

Description