67023-103C datasheet(4/7 Pages) MICROPAC

4 / 7 page

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918

www.micropac.com

E-MAIL:

optosales@micropac.com

2 - 7

4N51, 4N52,

67023 4N53, 4N54

HERMETIC, NUMERIC AND HEXIDECIMAL DISPLAYS

*RECOMMENDED OPERATING CONDITIONS:

PARAMETER

SYMBOL

MIN

MAX

UNITS

Supply Voltage

4N51

4N52

4N53

4N54

VCC

4.5

5.5

Operating Temperature

ALL

-55

100

°C

Enable Pulse Width

4N51

4N52

4N54

100

Time data must be held before positive

4N51

transition of enable line

4N52

4N54

tSETUP

Time data must be held after positive

4N51

transition of enable line

4N52

4N54

tHOLD

Enable pulse rise time

4N51

4N52

4N54

tTLH

200

Forward Current

4N53

510

SELECTION GUIDE

67023-001

4N51 Commercial (0° to 70°C)

67023-101

4N51 Screened to TXV level (-55° to +100°C) with 100% screening.

67023-101C

4N51 marked with DSCC P/N JM87157/00101AXX (-55° to +100°C) with 100% screening.

67023-002

4N52 Commercial (0° to 70°C)

67023-102

4N52 Screened to TXV level (-55° to +100°C) with 100% screening.

67023-102C

4N52 marked with DSCC P/N JM87157/00102AXX (-55° to +100°C) with 100% screening.

67023-003

4N53 Commercial (0° to 70°C)

67023-103

4N53 Screened to TXV level (-55° to +100°C) with 100% screening.

67023-103C

4N53 marked with DSCC P/N JM87157/00103AXX (-55° to +100°C) with 100% screening.

67023-004

4N54 Commercial (0° to 70°C)

67023-104

4N54 Screened to TXV level (-55° to +100°C) with 100% screening.

67023-104C

4N54 marked with DSCC P/N JM87157/00104AXX (-55° to +100°C) with 100% screening.

67023-034

4N54, green commercial (0° to 70°C)

67023-315

4N54, green Mil-Temp (-55° to +100°C) with 100% screening.

NOTES:

1. When ordering DSCC part numbers, you may order by the MII part number or the DSCC part number.

2. The first X at the end of M87157/0010XA[X]X designates lead finish. In place of the X use A for hot solder dip

or C for gold finish.

3. Second X at the end of the M87157/0010XAX[X] designates luminous intensity code. In place of the X use C

thru K to indicate desired intensity level.

*JEDEC Registered Data

67023-103C Folha de dados(PDF) 4 Page - Micropac Industries

67023-103C Folha de dados(HTML) 4 Page - Micropac Industries

Html Pages

1 2 3 4 5 6 7

Folha de dados Download

Ligação URL