| Os motores de busca de Datasheet de Componentes eletrônicos |
|
AN5950 Folha de dados(PDF) 21 Page - Dynex Semiconductor |
|
|
|||||||||||||||||||||||||||||
AN5950 Folha de dados(HTML) 21 Page - Dynex Semiconductor |
|
21 / 23 page ![]() AN 5950 Page 21 of 23 contributes towards the switching loss per pulse (see Application Note AN5951). APPENDIX 6: Dependence of Tq, Qs, and Irr on temperature and commutation conditions The turn-off process in a thyristor begins when the anode current falls below the holding current. However the thyristor cannot revert to the blocking state instantaneously because of the stored charge phenomenon. During conduction, current flow is achieved through the injection of excess carriers (charge) from the electrodes. As the forward current decreases towards extinction, a number of the excess carriers recombine at a rate governed by the carrier lifetime. It can be shown (1) that for fast rates of fall of the forward current (di/dt) the Stored Charge is dependent on the value of the forward current and independent of the di/dt and conversely, at slow values of di/dt the Stored Charge is independent of the forward current and dependent on the di/dt. The terms “fast” and “slow” are relative and are determined by the length of the current fall time relative to the carrier lifetime. For most Phase Control Thyristor applications, the turn-off di/dt can be classed as “slow”, therefore the Stored Charge is independent of the initial current. Curves of the variation of Stored Charge and Reverse Recovery Current on di/dt are given in the data sheet at a Tvj of 125°C. Figure 24 shows the typical normalised dependence of Stored Charge on Tvj, while figure 25 is the corresponding curve for the Reverse Recovery Current. Similarly (2) it can be shown that the time needed for the thyristor to regain the ability to block forward current ( tq) is dependent upon temperature, di/dt and dV/dt. . Figures 26 to 28 show the typical, normalised dependence of tq on these conditions. Fig. 24 Variation of stored charge with temperature Fig.25 Dependence of reverse recovery current on junction temperature 0 0.2 0.4 0.6 0.8 1 1.2 0 20 40 60 80 100 120 140 Virtual Junction Temperature, Tvj - (oC) 0.6 0.7 0.8 0.9 1 1.1 1.2 0 50 100 150 200 Junction temperature, Tvj - (oC) |
|
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |