14.11.2013

SMC970

2 of 2

Recommended Land Layout (Unit: mm)

1. Soldering Conditions

• DO NOT apply any stress to the lead particularly when heat.

• After soldering the LEDs should be protected from mechanical shock or vibration until the

LEDs return to room temperature.

• When it is necessary to clamp the LEDs to prevent soldering failure, it is important to

minimize the mechanical stress on the LEDs.

Soldering Conditions

2. Static Electricity

• The LEDs are very sensitive to Static Electricity and surge voltage. So it is recommended

that a wrist band or an anti-electrostatic glove be used when handling the LEDs.

• All devices, equipment and machinery must be grounded properly. It is recommended that

precautions should be taken against surge voltage to the equipment that mounts the LEDs.