TS78M05A

3-Terminal 500mA Positive Voltage Regulator

1/5

Version: D13

TO-252

(DPAK)

General Description

The TS78M05A Series positive voltage regulators are identical to the popular TS7805 Series devices, except that

they are specified for only half the output current. Like the TS7805 devices, the TS78M05A Series 3-Terminal

regulators are intended for local, on-card voltage regulation.

Internal current limiting, thermal shutdown circuitry and safe-area compensation for the internal pass transistor

combine to make these devices remarkably rugged under most operating conditions. Maximum output current with

adequate heatsink is 500mA

Features

●

Output Voltage 5V

●

Output current up to 500mA

●

Internal thermal overload protection

●

Internal short-circuit current limiting

●

Output transistor safe-area compensation

●

Output voltage offered in 2% tolerance

Standard Application Circuit

A common ground is required between the input and the

output voltages. The input voltage must remain typically

2.0V above the output voltage even during the low point

on the Input ripple voltage.

XX = these two digits of the type number indicate

voltage.

* = Cin is required if regulator is located an appreciable

distance from power supply filter.

** = Co is not needed for stability; however, it does

improve transient response.

Ordering Information

Part No.

Package

Packing

TS78M05ACP RO

TO-252

2.5Kpcs / 13” Reel

TS78M05ACP ROG

TO-252

2.5Kpcs / 13” Reel

Note: “G” denotes Halogen Free Product.

Parameter

Symbol

Limit

Unit

Input Voltage

35

V

Power Dissipation

Internal Limited

W

Operating Junction Temperature

0~+125

Storage Temperature Range

-65~+150

Thermal Resistance - Junction to Case

8

Thermal Resistance - Junction to Ambient

100

Pin Definition:

1. Input

2. Ground (tab)

3. Output